Introduction; Intended Purpose - Parkside PHPA 20-Li A1 Originalbetriebsanleitung

GB IE
Content
Introduction ............................... 16
Intended purpose ....................... 16
General description .................... 17
Extent of the delivery ...................... 17
Functional description ..................... 17
Overview ...................................... 17
Technical data ............................ 17
Safety instructions ...................... 18
Symbols and icons ......................... 18
General safety instructions for power
tools ............................................. 18
Initial start-up ............................ 21
Inserting the glue stick .................... 21
Removing/inserting the
rechargeable battery ...................... 21
Switching on and off ...................... 21
Operating temperature
indicator ....................................... 22

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
and for the applications specified.
16
Working with the device ............ 22
Preparing the bonding surfaces ........ 22
Gluing .......................................... 22
Cleaning and maintenance ......... 23
Cleaning ....................................... 23
Maintenance ................................. 23
Storage ...................................... 23
Disposal and protection of the
environment .............................. 23
Replacement parts/accessories ... 23
Guarantee ................................. 24
Repair Service ............................ 25
Service-Center ............................ 25
Importer .................................... 25
Trouble shooting ........................ 26
Translation of the original EC
declaration of conformity ............ 90
Exploded drawing ..................... 97
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The device is suitable for bonding wood,
cardboard, packaging, PVC, carpet, seals,
plastic, leather, ceramic, glass and fabric
with hot glue. The material to be bonded
must be dry, clean and free of grease.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The user or operator is responsible for
accidents causing injury to other people