Mains Part - Beurer BM 85 Gebrauchsanweisung

Technical information is subject to change without notification
to allow for updates.
The serial number is located on the device or in the battery
compartment.
• This device complies with European Standard EN 60601-1-2
(In accordance with CISPR 11, IEC 61000-4-2,
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11) and is sub-
ject to particular precautions with regard to electromagnetic
compatibility. Please note that portable and mobile HF com-
munication systems may interfere with this unit.
• This device corresponds to the EU Medical Devices Direc-
tive 93/42/EEC, the German Medical Devices Act (Medizin-
produktgesetz) and the standards EN 1060-1 (non-invasive
sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medical
electrical equipment – Part 2 – 30: Particular requirements
for the basic safety and essential performance of automated
non-invasive sphygmomanometers).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
• We hereby confirm that this product complies with the
European RED Directive 2014/53/EU. The CE Declaration of
Conformity for this product can be found under:
www.beurer.com/web/we-landingpages/de/
cedeclarationofconformity.php.

13. Mains part

Model No. OH-1048A0500600U2 VDE
Input 100 – 240 V AC, 50 – 60 Hz; 120-60 mA
Output 5 V DC, 600 mA, in conjunction with Beurer
blood pressure monitors only
Manufac- Dongguan Oriental Hero Ele. Co., LTD.
turer
Protection The device is double protected and has a
primary-side cutout switch which discon-
nects the device from the mains in case of
malfunction.
Polarity of the the DC voltage connection
Insulated / protection class 2
Housing and The housing of the mains part protects users
protective from touching live parts or parts that could be
covers live (for example with their fingers, or with a
needle or checking hook).
The user must not touch the patient and the
output connector of the AC mains part at the
same time.
37