Cleaning The Sponge Filter - hanseatic V18C01A-80 Gebrauchsanleitung

Page EN-22 Care and maintenance
3. Remove the coarse dust fil-
ter (34) as illustrated.
4. Wash the coarse dust fil-
ter (34) under running water.
Should the coarse dust fil-
ter (34) be damaged or no
longer sufficiently cleanable, it
must be replaced with a new
one.
5. Allow the coarse dust filter
to (34) dry completely.
6. Insert the coarse dust filter (34)
back into the vacuum cleaner.
7. Insert the dust bin (7) as de-
scribed in section "Emptying
the dust bin" on page EN-20.
Cleaning the sponge
filter
1. Pull the mains plug (25) out of
the socket.
2. Remove the dust bin (7) as
described in section "Emptying
the dust bin" on page EN-20.
(34)
3. Remove the inlet filter (35) and
the sponge filter (36).
4. Wash the sponge filter (36) un-
der running water.
Should the sponge filter (36)
be damaged or no longer suf-
ficiently cleanable, it must be
replaced with a new one.
5. Allow the sponge filter (36)
to dry completely.
6. Re-insert the sponge filter (36)
into the inlet filter (35).
7. Re-insert the inlet filter (35)
with the sponge filter (36).
8. Insert the dust bin (7) as de-
scribed in section "Emptying
the dust bin" on page EN-20.
(36) (35)