Page EN-24
Care and maintenance
4. Only rinse the hygiene fil-
ter (39) with clean water, tap
it out and/or clean it with com-
pressed air. Never use deter-
gent or washing-up liquid to
clean the hygiene filter (39).
5. Allow the hygiene filter to
dry (39) completely.
6. Reinsert the hygiene filter (39)
and the filter cover (37).
The article numbers for
re-ordering motor protec-
tion and hygiene filters are
listed in Chapter "Service" on
page EN-27.
Cleaning the appliance
WARNING
Risk of electric shock!
Improper use of the appli-
ance may lead to serious
injury or death.
Before cleaning the appli-
■
ance, pull the mains plug
out of the socket.
Ensure that no water seeps
■
into the appliance.
Never immerse the appli-
■
ance in water.
Only insert the mains plug
■
into the socket if all appli-
ance components are com-
pletely dry.
NOTICE
Risk of damage!
Improper cleaning of the
appliance can impair the
surface.
Do not use any abrasive
■
cleaners (scouring or thin-
ning agents) to clean the
appliance.
• Wipe
– the housing,
– The inside of the air vent (5)
and
– the accessories
with a damp cloth as required.
Never allow liquid to penetrate
the vacuum.
• Occasionally clean the air
vent (5) with a soft brush.
Cleaning the floor
nozzle
• Occasionally vacuum the un-
derside of the floor nozzle (14)
with the crevice nozzle (16).