Cleaning The Foam Filter . En - hanseatic HVBL8506BLMC Gebrauchsanleitung

page EN-22 Care and maintenance
The coarse dust filter should be
replaced regularly.
1. Pull the mains plug (11) out of
the socket.
2. Remove the dust bin as de-
scribed in section „Emptying
the dust bin" on page EN-20.
(28)
3. Remove the coarse dust
filter (28) as illustrated.
4. Wash the coarse dust filter un-
der running water.
Should the coarse dust filter
be damaged or no longer suf-
ficiently cleanable, it must be
replaced with a new one.
5. Allow the coarse dust filter
to dry completely.
6. Insert the coarse dust filter
back into the vacuum cleaner.
7. Insert the dust bin as de-
scribed in section „Emptying
the dust bin" on page EN-20.
Cleaning the foam
filter
1. Pull the mains plug (11) out of
the socket.
2. Remove the dust bin (5) as
described in section „Emptying
the dust bin" on page EN-20.
(5)
3. Remove the foam filter
frame (29) and the foam
filter (30).
4. Wash the foam filter under run-
ning water.
If the foam filter is damaged
or can no longer be sufficient-
ly cleaned, it must be replaced
with a new one.
5. Allow the foam filter to dry
completely.
6. Reinsert the foam filter into the
foam filter frame.
7. Re-insert the foam filter with
the foam filter frame into the
dust bin (5).
(30) (29)