Additional Functions; Quick Pre-Heating; Setting The Cooking Time; Setting The End Of The Cooking Time En - hanseatic 7NM30T0-E111E00 Gebrauchsanleitung

Page EN-16

Additional functions

Additional functions

Quick pre-heating

The oven offers an additional function in or-
der to speed up the pre-heating process (ex-
ceptions: functions ,
• Select a function and a temperature, as
described above, and tap the sensor
(10).
The pre-heating symbol will also appear
in the display. The oven will begin to heat.
When the pre-set temperature has been
reached, you will hear two signal tones.

Setting the cooking time

(1)
You can set a cooking time of up to 9 hours.
The cooking time can be set in the range of
– up to 30 minutes in 1 minute steps.
– from 30 minutes in 5 minute steps.
1. Select a function and a temperature, as
described above.
2. Tap the sensor
(1)
On the left, next to the temperature, the
display will flash "00: 0 0 min".
3. Set the desired cooking time using the
sensors
After a short time, the cooking duration
will light up permanently.
4. Start the oven's operation with the sensor
Once the preset cooking duration has
elapsed, you will hear five signal tones
(10)
and the display will show "END." The oven
will switch to stand-by mode.
g
).
approx. 6 seconds after the last sensor
operation.
To end the cooking process early, switch the
oven off with the sensor
Setting the end of the cooking
time
(5)
If you want your cooked food to be ready at
a certain time, you must set the end of the
cooking time and the cooking duration.
(5).
and or the slider (7).
(2).
The cooking duration can be changed
at any time. The change will take eff ect
(13).
(11)
(1)