KCI V.A.C.ULTA Update-Anleitung Seite 8

Export Logs Screen
1. Open the User Data Interface door at the front of the V.A.C.ULTA™
Therapy Unit.
2. Insert memory device into the unit data port.
3. Press the Arrow button displayed next to
Export Logs.
4. When export is complete, remove memory device from data port and
close the User Data Interface door.
If a red X appears during export, remove the memory device, reinsert
into the data port and press the
appears after a second attempt, refer to the Data Transfer Errors
section in the V.A.C.ULTA™ Therapy Unit User Manual. If errors
continue, contact KCI (see page 16).
Arrow button again. If a red X
8