KCI V.A.C.ULTA Update-Anleitung Seite 15

V.A.C. VERALINK™ Alarm Testing
2. ALARM TEST COMPLETION
After successful completion of Alarms tests, the Alarms testing with the new steps is now complete.
1. Attach the V.A.C. VERALINK™ test cassette to the unit.
2. Press the Next button to continue testing.
If the V.A.C. VERALINK™ Test Cassette is properly in place this
screen will appear with two
(see figure at left).
If a red X appears on this screen, remove and re-seat the V.A.C.
VERALINK™ Test Cassette, press the
the test cassette, then press the
disappear, contact KCI (see page 16 of this addendum).
green checks
Back button, check fluid in
Next button. If the red X does not
15