Warranty; Spare Parts - Atlas Copco ETD SR21-07-I06-PS Original-Produktanweisungen

Safety Information
• Make sure to take frequent breaks.
• Avoid extreme arm or wrist postures, par-
ticularly for operations requiring a degree
of force.
• Adjust for convenient field of vision by mini-
mizing movement of the eyes and head during
the work task.
• Use the appropriate lighting for the work task.
• Select the appropriate tool for the work task.
• Use ear protection equipment in noisy environ-
ments.
• Use high-quality inserted tools or consumables
to minimize exposure to excessive levels of vi-
bration.
• Minimize exposure to reaction forces.
• When cutting:
A cut-off wheel can get stuck if the wheel is
either bent or if it is not guided properly.
Make sure to use the correct flanges for cut-
off wheels and avoid bending the wheel
during cut-off operation.
• When drilling:
The drill might stall when the drill bit
breaks through. Makes sure you use support
handles if the stall torque is too high. The
safety standard ISO11148 part 3 recom-
mends using something to absorb the reac-
tion torque above 10 Nm for pistol grip
tools and 4 Nm for straight tools.
• When using direct-driven screw or nutrun-
ners:
Reaction forces depend on tool setting and
joint characteristics. The ability to bear re-
action forces depends on the operator's
strength and posture. Adapt the torque set-
ting to the operator's strength and posture
and use a torque arm or reaction bar if the
torque is too high.
• Use dust extraction system or mouth protection
mask in dusty environments.
Country of origin
Please refer to the information on the product la-
bel.

Spare parts

Parts without ordering number are not delivered
separately for technical reasons.
6 © Atlas Copco Industrial Technique AB - 9836 7094 00
The use of other than genuine Atlas Copco re-
placement parts may result in decreased tool per-
formance and increased maintenance and may, at
the company option, invalidate all warranties.

Warranty

Contact the Atlas Copco sales representative
within your area to claim a product. Warranty will
only be approved if the product has been installed,
operated, lubricated and overhauled according to
the Product Instructions.
Warranty will not be approved if it should be de-
tected that the electric motor has been opened.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Symbols on the tool
The symbols on the tool have the following mean-
ings:
ETD SR21-07-I06-PS