Noise And Vibration Data; Vibration Declaration Statement - Atlas Copco LCD 500 Sicherheits- Und Betriebsanleitung

LCD 500, 1500

Noise and vibration data

Type
LCD 500 (Ø 102 mm, 20 lpm)
LCD 500 (Ø 102 mm, 30 lpm)
LCD 1500 (Ø 62 mm, 20 lpm)
LCD 1500 (Ø 62 mm, 30 lpm)

Vibration declaration statement

Vibration value A and uncertainty B determined according to ISO 20643. See table "Noise and vibration data"
for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2010 Atlas Copco Construction Tools AB | No. 3392 5189 90a | 2010-01-01
Original instructions
Noise
Sound pressure Sound power
Declared values
ISO 11203 2000/14/EC
Lp
r=1m dB(A) rel guaranteed dB(A)
20µPa
<70
<70
<70
<70
Safety and operating instructions
Three axes values
Declared values
Lw
A
2
m/s value
rel 1pW
- 3.10
- 3.00
- 2.70
- 3.40
Vibration
ISO 20643
B
2
m/s spreads
0.81
0.82
0.76
0.83
19