Computer Function - AsViva C16 Benutzerhandbuch

COMPUTER FUNCTION

The things you should know before exercise
A. User Data:
You should input your personal data before workout. Press BODY FAT key to enter your personal
data of sex, age, height and weight then the computer can save the data unless take out the batteries.
B. Clock Mode:
a. The computer will enter the clock mode when there is no signal input or no keys be pressed
after 4 minutes. You can press ENTER key to switch the clock and temperature at the clock
mode or press other keys to quit the clock mode.
b. You can setup the CLOCK by holding UP+ENTER keys; and ALARM by holding
DOWN+ENTER keys for over 2 seconds, then you can quit by ENTER key.
c. By holding the ENTER and UP keys together for over two seconds, you can check the current
clock at "NO SPEED" mode.
Functions and Features:
1. CLOCK: Display the current clock in hour and minute and second.
2. ALARM: You can set up your morning call or setting time by this computer and it will beep alarm 1
minute when your setting time is reached.
3. TEMPERATURE: Display the current temperature.
4. SCAN: During the exercise stage, the computer will automatically scan the function of TIME,
SPEED, DISTANCE, CALORIES, PULSE and RPM per each for 6 seconds unless press the
ENTER key to exit the auto-scan function. When the computer exits the manual-scan then the
message window will show "SCAN" for 2 seconds then switch to auto-scan function.
5. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will automatically
count up from 0:00 to 99:59 in one second intervals. You many also program your computer to
count down from a set value by using the UP and DOWN keys. If you continue exercising once
the time has reached 0:00, the computer will begin beeping, and reset itself to the original time
set, letting you know your workout is done.
6. SPEED: Displays your workout speed value in KM/MILE per hour. If no speed signal input then the
computer will display "NO SPEED" on the window.
7. DISTANCE: Displays the accumulative distance traveled during each workout up to a maximum of
99.9KM/MILE.
8. CALORIES: Your computer will estimate the cumulative calories burned at any given time during
your workout.
9. PULSE: Your computer displays your pulse rate in beats per minute during your workout. If no
pulse signal input then the computer will display "NO pulse" on the window.
10. RPM: Your pedal cadence.
11. AGE: Your computer is age-programmable from 10 to 99 years. If you do not set an age, this
function will always default to age 35.
12. PULSE RECOVERY: During the START stage, leave your hands holding on grips or leave the
chest transmitter attached and then press "PULSE RECOVERY" key,time starts counting from
01:00 - 00:59 - - to 00:00. As soon as 00:00 is reached, the computer will show your heart rate
recovery status with the grade F1.0 to F6.0 and message window will show your workout
situation. The details as follows,
13. BLUETOOTH ACCESS DEVICE: There is a Bluetooth device attached with monitor.
1.0 means OUSTANDING
1.0＜F＜2.0 means EXCELLENT
2.0≦F≦2.9 means GOOD
3.0≦F≦3.9 means FAIR
4.0≦F≦5.9 means BELOW AVERAGE
6.0 means POOR
45 / 52