AsViva C16 Benutzerhandbuch Seite 41

ASSEMBLY INSTRUCTION
1. Attach the bottom left handlebar (14) to the left side axle of the front support (13). Secure
using one D type washer (36), one flat washer (35), one spring washer (34) and one hex
head bolt (33). Attach the cap (32) onto the hex head bolt (33).
2. Slide the sleeve (40) through the left pedal tube and the bottom left handlebar. Attach the
left pedal tube (11) to the lower left handlebar (14). Secure using one hex head bolt (39), one
flat washer (41), one nylon locknut (42). Attach two caps (32) onto the hex head bolt (39)
and locknut (42).
3. Attach the left pedal tube (11) to the left crank arm (49). Secure using one hinge bolt (45L),
one wave washer (46), one flat washer (47) and one nylon locknut (48L).
4. Repeat for the lower right handlebar (15).
Note: The left hinge bolt needs to be threaded in counter-clockwise direction and the right hinge
bolt needs to be threaded in a clockwise direction.
STEP 3
41 / 52