Parkside PHM 1 A1 Montage-Und Sicherheitshinweise Seite 8

appropriately. Risk of injury exist if assembled
incorrectly. Damage part can effect safety and
function.
CAUTION! Be sure to place the product on
solid, even surface providing a solid footing.
Check the stability before use.
Protect the product from strong wind and storms.
Place the product in a place that is sheltered
from the wind.
Loads must be applied evenly to the product to
prevent it from tipping up.
Take care not to exceed the maximum
weight of 40 kg, otherwise this may
max.
40 kg
result in a risk of injury or damage
to the product. Otherwise this may result in a
risk of injury or damage to the product.
Assembly
We recommended that two person to assembly
the product together in order to avoid injuries or
damage to people or the product.
Connecting long side panel
panel and bottom panel
3
nuts and washers
7
Note: Bottom panel
top of the inner edge of side panels
Install the legs with screws, nuts and wash-
1
ers (see fig B).
7
Bend the corner parts
sert the bent corner parts
raised bed. Then fix it with screws, nuts and
washers (see fig C).
7
Bend the bottom part
edge of the side panels
Insert the plastic foot
fig D).
Clean and care
Allow all parts to dry well before packing up
the product. This will prevent mold, odors and
discoloration.
Use a moist, lint-free cloth to clean and care for
the product.
8 GB/IE
, short side
2
using screws,
4
(see fig A).
must be placed on
4
.
2 3
into a right angle. In-
5
on the corners of
5
corner parts into the
5
(see fig D).
2 3
onto the legs (see
6 1
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR / Min., (peak))
(0,06 EUR / Min., (off peak))
E-Mail: owim@lidl.ie