Connecting The Wired Remote Controller (If Necessary) - Fujitsu AIRSTAGE ASYE07GACH Installationsanleitung

Function
Function
number
External
46
control
Error
report 47
target
Fan set-
ting when
cooling 49
thermo-
stat OFF
6.4.1. Button name and function
6.4.2. Checking the function settings
Press and hold the "MANUAL AUTO" button on the indoor unit for 3 seconds to check
the function settings. It is necessary to disconnect the power in order to return to normal
operation mode.
(1) Indoor unit and refrigerant address indication
Indication pattern
Indicator name
OPERATION indicator lamp (Green)
TIMER indicator lamp (Orange)
FILTER indicator lamp (Red)
• Indoor unit address example
(Example) ADDRESS : 24
OPERATION indicator
lamp (Green)
TIMER indicator
lamp (Orange)
FILTER indicator
lamp (Red)
9377773098-01_IM.indb 10 9377773098-01_IM.indb 10
Downloaded from www.Manualslib.com
Setting number Default Details
○ Allow an external controller to start or
00 Start/Stop
stop the system, or to perform an emer-
gency stop.
* If an emergency stop is performed from
an external controller, all refrigerant
Emergency
01
systems will be disabled.
stop
* If forced stop is set, indoor unit stops by
the input to the external input terminals,
and Start/Stop by a remote controller is
02 Forced stop
restricted.
○
00 All
Change the target for reporting errors.
Display only
Errors can either be reported in all loca-
on central
01 tions, or only on the wired remote.
remote
controller
Follow the
When set to 01, the fan stops when the
setting on ○
00
thermostat is OFF in cooling operation.
the remote
Connection of the wired remote control-
controller
ler (2-wire type or 3-wire type) and
switching its thermistor are necessary.
01 Stop
FILTER indicator lamp (Red)
TIMER indicator lamp (Orange)
OPERATION indicator lamp (Green)
Indication pattern
Indoor unit address Refrigerant address
ON Flash (1.0s ON/1.0s OFF)
Address: tens place (0.5s ON/0.5s OFF)
Address: ones place (0.5s ON/0.5s OFF)
1 cycle 12 sec
ON
ON
OFF
ON
0.5s 0.5s 0.5s 0.5s
10 sec
OFF
ON
0.5s 0.5s 0.5s 0.5s 0.5s 0.5s 0.5s 0.5s
8 sec
OFF
manuals search engine
• Refrigerant address example
(Example) ADDRESS : 30
OPERATION
ON
indicator lamp
1.0s
1.0s 1.0s
(Green)
OFF
ON
TIMER indicator
lamp (Orange) 0.5s 0.5s 0.5s 0.5s 0.5s 0.5s
OFF
ON
FILTER indicator
lamp (Red)
OFF
• Setting details
Function number Item
01 Indoor unit address
02 Refrigeration address
For use with a remote controller, set all rotary switches to 0, and refer to "6.1. Setting the
address" for details.
All switches are set to 0 at the factory.
(2) Others
Indication pattern
Indicator Name
OPERATION indicator lamp (Green) Function number; tens place (0.5s ON/0.5s OFF)
Function number; ones place
TIMER indicator lamp (Orange)
(0.5s ON/0.5s OFF)
FILTER indicator lamp (Red) Setting number: (0 to 9) (0.5s ON/0.5s OFF)
(Example) Function : 31, Setting number : 2
OPERATION
ON
indicator lamp
0.5s 0.5s 0.5s 0.5s 0.5s 0.5s
(Green)
OFF
TIMER indicator ON
lamp (Orange) 0.5s 0.5s
OFF
ON
FILTER indicator
0.5s 0.5s 0.5s 0.5s
lamp (Red)
OFF
6.5. Connecting the wired remote controller
(If necessary)
In order to connect the wired/simple remote controller to the external switch controller, the
wire assembly (Accessories) which is attached to the indoor unit needs be connected to the
end of remote controller cable.
(1) Use a tool to cut off the terminal on the end of the remote controller cable, and then
remove the insulation from the cut end of the cable.
For 2-wire type 20 mm For 3-wire type
(2) Connect the remote controller cable with connecting cable with solder. IMPORTANT:
Be sure to insulate the connection between the cables.
For 2-wire type
Solder and insulate the connected parts.
Remote controller
cable (non polar)
Cut and insulate
For 3-wire type
Solder and insulate the connected parts.
White
Red
Black
Remote controller
cable
For dual control or group control
1 cycle 12 sec
1.0s 1.0s 1.0s
1.0s
9 sec
OFF
Setting number
00 to 63
00 to 99
Indication pattern
1 cycle 12 sec
9 sec
11 sec
10 sec
20 mm
Red White
Black
Connecting cable
(Accessories)
Red White
Black Connecting cable
(Accessories)
En-10
7/12/2012 3:05:25 PM 7/12/2012 3:05:25 PM