Manual Auto Operation; Starting Operation; Stopping Operation; Adjusting The Direction Of Air Circulation - Fujitsu AIRSTAGE AU A20L-Serie Bedienungsanleitung

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.
CAUTION!

Starting Operation

Press the MANUAL AUTO button on the operating control panel.
The operation can be set in the following setting.
Operating mode
Fan speed
Setting temperature

Stopping Operation

Press the MANUAL AUTO button on the operating control panel.

ADJUSTING THE DIRECTION OF AIR CIRCULATION

The vertical wind direction can be controlled with the control unit.
Vertical direction
Cooling & Dry : 1, 2, 3, 4
Heating : 1, 2, 3, 4
En-3
Do not press the MANUAL AUTO button with wet hands or pointed objects, otherwise an electric
shock or malfunction may occur.
AUTO When Auto mode cannot be selected, it will operate in the same mode as the
other indoor unit in the same system. (When other indoor unit in the same sys-
tem doesn't operate, the air conditioner will operate in cooling.)
AUTO
23 °C
1
2
3
4