Assembly; Electrostatic Discharge - Bosch Rexroth CS351 Serie Betriebsanleitung

74/96 Bosch Rexroth AG

Assembly

6 Assembly
Assembling the Compact System
CAUTION
Risk of damage to persons and property!
Assembly of the Compact System requires
basic mechanical and electrical skills.
No one except qualified personnel

(see "Personnel qualification" on
page 51) is authorizied to assemble
the Compact System.
WARNING
Dangerous shock currents due to
inadequate PE wire connections!
Danger to life
Make sure the PE wire connections

have not been damaged by
mechanical, chemical or
electrochemical influences. A
permanent connection is required.
CAUTION
Destruction of electrical components!
Health risk
Do not destroy any installed

components. Dispose of destroyed
components in a professional way.
CS351/CC-CS351 | 3 609 929 B45/2019-12
CAUTION

Electrostatic discharge!

Damage to the Compact System
Comply with all the precautions for ESD

protection when handling components
and modules! Avoid electrostatic
discharge!
Always observe the ambient conditions
specified in the technical data (see "Technical
data" on page 88).
On delivery, the Compact System has two
preassembled metal brackets on the rear (wall
bracket and a lift-out protection). The Compact
System is hung in the suspension strip (in the
scope of delivery) mounted to the wall using the
wall brackets. The Compact System must be
bolted down at the lift-out protection to ensure
that it is not unintentionally taken off the
suspension strip.