76/96 Bosch Rexroth AG
Commissioning
The permissible installation position for the
Compact System is vertical.
During assembly, the Compact System should
have at least 10 mm space when lined up and at
least 300 mm space above it.
CAUTION
Overheating of the Compact System!
Damage to the Compact System caused by
overheating
Keep the air ways used for cooling at the
rear side of the system clear when
assembling the Compact System.
Fig. 23:
Compact System distance dimensions
(dimensions in mm)
10
CS351/CC-CS351 | 3 609 929 B45/2019-12
7
Commissioning
CAUTION
Risk of damage to persons and property!
Commissioning of the Compact System
requires basic mechanical and electrical
skills.
No one except qualified personnel (see
"Personnel qualification" on page 51) is
authorized to commission the system.
CAUTION
Loss of protection class IP 54 due to
missing seals and plugs!
Liquids and foreign bodies may penetrate and
damage the product.
Prior to commissioning make sure that all
dummy panels are in place and that the
front cover is closed and locked.