Decommissioning; Disassembly And Replacement - Bosch Rexroth CS351 Serie Betriebsanleitung

CS351/CC-CS351 | 3 609 929 B45/2019-12
Decommissioning/ Disassembly and replacement
10

Decommissioning

The Compact System is a component that does
not require decommissioning. As a result, this
chapter of the manual does not contain any
information.
For details about how to disassemble or replace
your Compact System please refer to chapter "11
Disassembly and replacement" on page 85.
Bosch Rexroth AG
11 Disassembly and
replacement
The Compact System must be considered a unit.
As a result, the entire Compact System must be
exchanged if there are any defects or
malfunctions.
For complaints and repairs, please send the
assembled Compact System to the supplier or
our customer service workshop in Murrhardt,
Germany. Complaints and repairs cannot be
accepted if this procedure is not followed.
Disassembling
Follow the warnings printed on the label on the
Compact System:
WARNING
Dangerous internal voltage!
Before opening the device or performing

maintenance work, make sure that the
device is deenergized, protect it from
being switched on again, and allow a 90
second discharging time.
Read the manual before using the system

or performing maintenance work.
Fig. 32: Label on the Compact System
85/96
fully