Brother P-touch 9200DX Kurzanleitung Seite 24

Y In the Installing Print Monitor dialogue box that
appears, click the Browse button, specify the file
"d:\English\ptouch\driver\pt9200dx\win2000\usb\port
\monitor.inf" (where "d:" is the name of the drive
containing the P-touch Editor CD-ROM), click the
Open button, and then click the OK button.
Z In the "Available port types" list box, select "Brother P-
touch USB Port", and then click the New Port button.
[ When the message "Automatically adds if the product
is connected" appears, click the OK button.
\ Close the Printer Ports dialogue box.
] In the Brother PT-9200DX Properties dialogue box that
appears, check that there is a check mark beside
"PTUSB (PT-9200DX-XXXXXXXXX):" (where
XXXXXXXXX is the serial number), and then click the
Close button.
Be sure to select the port with the serial number
that is the same as the P-touch serial number,
otherwise printing cannot be carried out properly.
The serial number is written above the barcode on
the silver label attached to the bottom of the P-
touch.
^ In the USB message dialogue box, click the Finish
button.
a In the Setup Complete dialogue box that confirms that
installation is complete, select "Yes, I want to restart
my computer now.", and then click the Finish button
to restart the computer.
21