Brother P-touch 9200DX Kurzanleitung Seite 11

(2) Serial port monitor installation
3 Click the Start button in the taskbar, select "Settings",
click "Control Panel", and then double-click "Print-
ers".
4 Select the "Server Properties" command in the [File]
menu.
5 Click the "Ports" tab, and then click the Add Port
button.
6 In the Printer Ports dialogue box that appears, click the
New Port Type button.
8
7 In the Installing Print Monitor dialogue box that
appears, click the Browse button.
8 In the Locate File dialogue box that appears, specify the
file "d:\English\ptouch\driver\pt9200dx\win2000
\monitor.inf" (where "d:" is the name of the drive
containing the P-touch Editor CD-ROM), and then click
the Open button.
9 In the Installing Print Monitor dialogue box, check that
the correct path appears in the "Copy files from" box,
and then click the OK button.
0 In the "Available port types" list box, select "Brother P-
touch Serial Port", and then click the New Port button.
A A dialogue box appears, allowing you to select the
PTCOM port where the PT-9200DX is connected.
Select "PTCOM1:" if the P-touch is connected to the
COM1 port, or "PTCOM2:" if the P-touch is connected
to the COM2 port, and then click the OK button.