For A Usb Connection; With Windows® 98 - Brother P-touch 9200DX Kurzanleitung

5 Check that the baud rate will be changed as desired,
and then click the Next button.
To change the settings, click the Back button, and
make the necessary changes.
6 When the dialogue box appears, showing that the
baud rate has been set as specified, click the Finish
button.
7 If installation of the printer driver is not complete,
finish installing it.

• For a USB connection:

With Plug and Play, new devices connected to the system
are detected, and their drivers are automatically installed. If
the PT-9200DX is connected through the USB port, its driver
will be installed with Plug and Play. Be sure to read the
installation instructions described below before installing the
file supplied on the CD-ROM.
Take extra care when installing the printer driver on a com-
puter running Windows® 2000.
With Windows® 98:
The software and printer driver installation should be per-
formed in the following order:
(1) P-touch Editor Version 3.1
(2) USB printer driver
(1) P-touch Editor Version 3.1 installation
Make sure that the P-touch is not connected to the
computer, otherwise P-touch Editor Version 3.1
may not be installed correctly.
1 Install P-touch Editor Version 3.1 according to the
procedure described in P-touch Editor Version 3.1
Installation on pages 22 through 23.
2 After installation of P-touch Editor Version 3.1 is
finished, install the USB printer driver as described
below.
(2) USB printer driver installation
3 In the Port Selection dialogue box that appears, select
"USB", and then click the Next button.
12
4 The USB message dialogue box appears. (Do not
click the Finish button.)
5 Connect the P-touch to the computer using the
enclosed USB interface cable, and then turn on the P-
touch. (refer to "Connecting the interface and power
supply cables" on page 3.)
6 After the Found New Hardware dialogue box appears,
click the Next button in the first Add New Hardware
Wizard dialogue box that appears.
7 In the next Add New Hardware Wizard dialogue box,
which allows you to select how to search for the
driver, select "Search for the best driver for your
device. (Recommended)", and then click the Next
button.