Brother P-touch 9200DX Kurzanleitung Seite 21

D In the dialogue box warning about replacing the
driver, click the Yes button.
E In the dialogue box that appears, allowing you to
confirm how the installation will be carried out, check
that the installation will be carried out as desired, and
then click the Next button.
F In the dialogue box warning that a digital signature
could not be found, click the Yes button.
G After the printer driver is installed, click the Finish
button.
H After installation of the printer driver is finished, install
the USB class driver as described below.
18
(3) USB class driver installation
I Click the Start button in the taskbar, select "Settings",
click "Control Panel", and then double-click "Sys-
tem". Click the "Hardware" tab, and then click the
Device Manager button.
J In the Device Manager dialogue box, click the plus
sign next to "Universal Serial Bus controllers". Next,
select "USB Printing Support", and then select
[Properties] command from the [Action] menu (or
right-click "USB Print Support", and then select the
[Properties] command from the menu that appears).
K In the USB Printing Support Properties dialogue box,
click the "General" tab, and then check that "PT-
9200DX" appears beside "Location".