Brother P-touch 9200DX Kurzanleitung Seite 18

7 In the next Add New Hardware Wizard dialogue box,
which allows you to select how to search for the
driver, select "Search for the best driver for your
device. (Recommended)", put a check only beside
"Specify a location", and then click the Browse
button.
8 In the Browse for Folder dialogue box that appears,
specify the folder "d:\English\ptouch\driver
\pt9200dx\win98" (where "d:" is the name of the
drive containing the P-touch Editor CD-ROM), and
then click the OK button.
9 Check that the correct path appears in the "Specify a
location" box, and then click the Next button.
0 After a short while, installation of the driver will be
ready. Check that "d:\English\ptouch\driver
\pt9200dx\win98\p···" (where "d:" is the name of the
drive containing the P-touch Editor CD-ROM) appears
below "Location of driver", and then click the Next
button.
Installation of the driver begins.
A In the dialogue box that allows you to select the USB
port where the PT-9200DX is connected, select
"PTUSB: Brother PT/CP USB Port", and then click the
Next button. (If two or more PT-9200DX models are
connected through their USB ports, finish the installa-
tion, and then change the port to "PTUSB (PT-
9200DX-XXXXXXXXX):" (where XXXXXXXXX is the
serial number).)
B In the dialogue box that appears, allowing you to
check the name of the printer, change the printer
name if desired, specify that this printer will not be the
default printer, and then click the Finish button.
15