Herunterladen Inhalt Inhalt Diese Seite drucken

Viewing Subtitles; Reconfiguring The Dtv Channel Settings; Replacing The Existing Channels; Adding New Channels - Pioneer PDP-5080XD Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Enjoying DTV broadcasts

Viewing subtitles

When in the DTV mode, press [ to turn subtitles on and off.
Subtitles On
Note
• When a programme is recorded with this function on, subtitles
are also recorded.

Reconfiguring the DTV channel settings

This section describes how to reconfigure the DTV channel settings
after setting up DTV channels using Auto Installation (page 26). You
can select "DTV Setup" only when watching DTV channels.
Reselecting a country
1
Press HOME MENU.
2
Select "Setup" (/ then ENTER).
3
Select "DTV Setup" (/ then ENTER).
4
Select "Installation" (/ then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
5
Select "Country" (/).
6
Select a country (/).
Installation
Aerial Power
Country
Add New Channels
Replace Existing Channels
Signal Check
Restore System Defaults
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select "DTV Setup" only when watching DTV channels.
Downloaded from
www.Manualslib.com
Off
Germany
manuals search engine

Replacing the existing channels

The following procedure discards the current DTV channel setups
and searches for receivable channels to redo the channel setups.
1
Repeat steps 1 to 4 provided for Reselecting a country.
2
Select "Replace Existing Channels" (/ then ENTER).
• The system first erases all channel information and then starts
channel search.
• To quit a channel search in progress, press HOME MENU.
Replace Existing Channels
Search Information
Existing Channels
Channels Found
Progress
30%
Note
• To complete "Replace Existing Channels", there must be more
than one hour at least left to the next preset recording or preset
Auto Update time.
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select "DTV Setup" only when watching DTV channels.

Adding new channels

Use the following procedure to search and register new channels
with the current DTV channel setups saved.
1
Repeat steps 1 to 4 provided for Reselecting a country.
2
Select "Add New Channels" (/ then ENTER).
• Channel search automatically starts. If any new channel is
found, it is automatically registered on the plasma television.
Add New Channels
Search Information
Existing Channels
Channels Found
Progress
30%
• To quit a channel search in progress, press HOME MENU.
Note
• The password entry screen does not appear if you have disabled
the password function. For details, see Using a password on
page 55.
• You can select "DTV Setup" only when watching DTV channels.
Found Channels
04
001
************
20
002
************
003
******
004
************
Found Channels
04
001
************
20
002
************
003
******
004
************
09
39
En

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pdp-sx5080dPdp-4280xdPdp-sx4280d

Inhaltsverzeichnis