Viewing Programme Information; Recording A Programme Using A Recording Equipment; Selecting A Programme For Immediate Watching - Pioneer PDP-505XDE Bedienungsanleitung

Using the Electronic Programme Guide (EPG) (for Analogue TV only)

Viewing programme information

1
Press EPG.
2
Select the desired programme ( /
Programme Information
13:00-13:30 *****
*******************
Record
RETURN Programme List
• Information about the selected programme appears.
3
Scroll the information ( / ).
• To return to the programme list screen, press
RETURN.
4
Press EPG to exit the menu.
Recording a programme using a record-
ing equipment
When recording equipment (such as a VCR or DVD recorder)
is in connection, you may use the Electronic Programme
Guide to preset TV programmes for recording.
1
Press EPG.
2
Select the desired programme ( /
Programme Information
13:00-13:30 *****
*******************
Record
Programme List
RETURN
• Information about the selected programme appears.
3
Press the red button.
4
Select "Rec Speed" ( / ).
then ENTER ).
Fri.02.07.04 12:46
EPG Exit
then ENTER ).
Fri.02.07.04 12:46
EPG Exit
5
Select "SP" (standard) or "LP" (extended) ( / ).
Programme Information
22:00-23:30 *****
*******************
Rec Speed SP
PDC/VPS ON
Record? OK
Record
RETURN Programme List
6
Select "PDC/VPS" ( / ).
7
Select "ON" or "OFF" ( / ).
8
Select "Record?" ( / ).
9
Select "OK" ( / then ENTER ).
10
Press EPG to exit the menu.
• Make sure to leave the VCR power on when presetting TV
programmes for recording.
• You can return to the programme list screen by pressing
RETURN.
• This function is available only when recording equipment
has been connected to the INPUT 2 or 3 terminal with the i/
o Link.A activated, using a SCART cable.
• For programmes preset (for recording) using the EPG, you
can perform deletion or change only on the recording
equipment (VCR or DVD recorder) which is a transfer
destination.
Selecting a programme for immediate
watching
Using the EPG, you can also select a TV programme currently
on air to immediately start watching.
1
Press EPG.
2
Select the desired programme currently on air ( /
then ENTER ).
Programme Information
13:00-13:30 *****
*******************
Watch
RETURN Programme List
• Information about the selected programme appears.
3
Press the green button.
• The EPG menu is quitted and the selected TV
programme is displayed using the entire screen.
Fri.02.07.04 12:46
LP
OFF
CANCEL
EPG Exit
Fri.02.07.04 12:46
EPG Exit
10
37
En