Useful Adjustment Settings; Switching The Vertical Drive Mode; (Av Source Only); Adjusting Image Positions - Pioneer PDP-5080XD Bedienungsanleitung

11

Useful adjustment settings

Chapter 11
Useful adjustment settings
About "Option" menus
The "Option" menu consists of two screens. To select the desired
menu, press repeatedly / to switch between Screen 1 and
Screen 2. The current screen number appears at the top right
corner on the screen.
Option
Position

Auto Size

Side Mask

HDMI Input

HDMI Control Setting

Blue LED Dimmer
Orbiter
Video Pattern
Option
Drive Mode
Colour System
Input Select
Game Control Pref
50
En
Downloaded from www.Manualslib.com
Off
High
On
1
Auto
Off
(For AV source)
manuals search engine

Switching the vertical drive mode

(AV source only)

You can select the desired drive mode according to the programme
you watch.
1 Press HOME MENU.
1/2
2 Select "Option" (/ then ENTER).
3 Select "Drive Mode" (/ then ENTER).
4 Select "1", "2" or "3" (/ then ENTER).
5 Press HOME MENU to exit the menu.
Note
• This setting can be made for each input source separately.
• This setting cannot be made when 480i, 480p, 1080i@60 Hz,
720p@60 Hz, 1080p@24 Hz or 1080p@60 Hz signals are input.
• The Drive Mode does not operate when "On" is selected in
"Game Control Pref".
2/2

Adjusting image positions

(AV source only)
This setting adjusts the horizontal and vertical positions of images
on the plasma television.
1 Press HOME MENU.
2 Select "Option" (/ then ENTER).
3 Select "Position" (/ then ENTER).
4 Select "H/V Position Adjust" (/ then ENTER).
5 Adjust the vertical position (/) or the horizontal position
(/).
6 Press HOME MENU to exit the menu.
Note
• To restore the factory defaults for all items, press / to select
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
• Adjustments are stored separately according to input source.
• Depending on the displayed video, the image position may not
change even after adjustment.