Viewing The Input Source; Selecting An Input Signal Type; Selecting An Output Source; Setting For The Language Of On-Screen Display - Pioneer pdp-42rxe Bedienungsanleitung

09 Adjustments and Settings
5
Press the EXIT button.
• You can select the modes by simply pressing the
remote control.

Viewing the Input Source

Once you have connected your audio and video systems, you
can view different sources by selecting the corresponding input.
1
Press the MENU button.
2 Press the c or d button to move to Screen, then press
the a or OK button.
3 Press the c or d button to move to Main Input, then
press the a or OK button.
4
Press the c or d button to select the required input
source as follows and press the OK button.
ANALOG CH - AV1 - AV2 - AV3 - S-VIDEO - VIDEO -
COMPONENT - HDMI
Screen
Screen Size
Main Input
PIP/TWIN
AV1 Input
AV2 Output
Screen Saver
Move Enter
• The Plasma Display switches to the selected source.
5
Press the EXIT button.
• You can select the sources by simply pressing the INPUT button on
the remote control.

Selecting an input signal type

After connecting the equipment to the AV1 terminal, specify the
type of video signals to be received from the connected
equipment.
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the a or OK button.
3
Press the c or d button to move to AV1 Input, then
press the a or OK button.
4 Press the c or d button to select the signal type (VIDEO
or S-VIDEO), then press the b or BACK button.
Screen
Screen Size
Main Input
PIP/TWIN
AV1 Input
AV2 Output
Screen Saver
Adjust
5
Press the EXIT button.
32
En
button on the
Auto ANALOG CH
ANALOG CH
AV1
AV2
VIDEO
AV3
ANALOG CH
S-VIDEO
VIDEO
COMPONENT
HDMI
Cancel
Auto
VIDEO
ANALOG CH
S-VIDEO
VIDEO
ANALOG CH
Return

Selecting an output source

After connecting the equipment to the AV2 terminal, specify the
source to be output to the connected equipment.
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the a or OK button.
3 Press the c or d button to move to AV2 Output, then
press the a or OK button.
4 Press the c or d button to select the required source as
follows and press the b or BACK button.
ANALOG CH -AV1 - AV2 - AV3 - S-VIDEO - VIDEO
Screen
Screen Size
Main Input ANALOG CH
PIP/TWIN
AV1 Input
AV2 Output ANALOG CH
Screen Saver
Adjust Return
5
Press the EXIT button.
Setting for the language of on-screen
display
You can select a language to be used for on-screen display such
as menus from following languages: English, German, Italian,
Spanish, French, Dutch, Swedish, Russian and Turkish.
1
Press the MENU button.
2 Press the c or d button to move to System, then press
the a or OK button.
3
Press the c or d button to move to Menu Language,
then press the a or OK button.
4 Press the c or d button to select the desired language as
follows.
English - Deutsch - Italiano - Español - Français -
Nederlands - Svenska - êÛÒÒÍËÈ - Türkçe
System
Menu Language English
TTX Language West Europe
Clock Setting
Adjust Return
5
Press the EXIT button.
Auto ANALOG CH
AV1
AV2
VIDEO
AV3
S-VIDEO
VIDEO