12
Using with other equipment
Connecting a personal computer
Use the PC terminals to connect a personal computer.
Note
• The PC input terminals are DDC2B-compatible.
Rear view
Stereo
mini jack cable
Displaying an image from a personal computer
To watch an image coming from the personal computer, press PC
on the remote control unit or press INPUT on the plasma television
to select "PC".
When connecting to a personal computer, the correct input signal
type is automatically detected. If the personal computer image does
not come in clearly, you may need to use Auto Setup menu. See
page 51.
Note
• The PC terminals cannot be used for audiovisual equipment.
60
En
Downloaded from
www.Manualslib.com
RGB cable
Personal computer
manuals search engine
Computer compatibility chart
Resolution
720 x 400
640 x 480 (VGA)
800 x 600 (SVGA)
1280 x 720
1024 x 768 (XGA)
1360 x 768 (Wide-XGA)
1280 x 1024 (SXGA)
Connecting an amplifier/AV receiver
You can enjoy more powerful sound by connecting such audio
equipment as an amplifier/AV receiver to the plasma television.
Rear view
Stereo
audio cable
Note
• For details, refer to the operation manual for the audio
equipment to be connected.
• Audio signals synchronizing with currently displayed images
are always output to the AUDIO OUT terminals.
• When signals are input from the HDMI terminals, no signals are
output from the DIGITAL OUT terminal.
• While in DTV mode, no signals are output if they are copy
guarded.
Frequency
70 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Optical digital cable
Amplifier/AV receiver