Max GS738C LT Betriebsanleitung Seite 17

REMOVING THE PIN
Pin
Follower
Holder
1 Pull the Follower Holder and press the Follower,then return
the Follow Folder.
2 Set the Magazine vertical and push the Nail Stopper to re-
move the Pin. Be sure that no pins remain in the Nose or
Magazine.
Follower
Nail Stopper
Pin
17
CHANGING THE HOOK DIRECTION
Hexagon Socket
Head Cap Screw
WARNING
• Remove the Fuel Cell and Battery.
The Hook can be directed in the two directions. Remove the hex-
agon socket head cap screw with hexagon wrench, change the
direction, and then, put back the bolts to reassemble.
REPLACING THE FUEL CELL
If the Fuel Gas is low, the pins cannot be driven.
WARNING
• Be sure to remove the Battery.
• Be sure to release the Trigger.
• Do not press the Contact Arm against the object.
1 Press the Latch, then pull the Fuel Cap.
Hook
Fuel Cap
Fuel
Cap