Installation - AsViva RA18 Benutzerhandbuch

INSTALLATION

Step 1
Remove the left side cover with a Phillips screwdriver.
Fill the water tank with tap water using the supplied silicone pump.
Make sure that you do not exceed the recommended water level.
WARNING: Overfilling the water tank can damage the rowing machine.
A. Turn the lid on the silicone pump clockwise to close it.
The required vacuum is only achieved with the closure closed.
B. Pour some water into a suitable container. Insert the silicone pump hose into the water tank
opening.
The narrow pipe should be immersed in the water in the tank.
Pressing the silicone pump fills the water from the container into the water tank.
C. By opening the closure of the silicone pump, the negative pressure is released and the filling of
the water tank is stopped.
32
E2001 Washer
E2004 Hexagon nut with flush 9
28 018 Tank shell S1256
019 Impeller S1257
28 018 Tank shell S1256
019 Impeller S1257
1
1
E2001 Washer
E2004 Hexagon nut with flush 9
1
1
28 018 Tank shell
019 Impeller S1