Optional Accessories - Teufel DynaCox evolution Gebrauchsanweisung

ES
FR
EN
DynaCox® evolution
DE

• Optional Accessories

REF
23.604.020.00
23.604.030.00
23.604.040.00
23.604.041.00
23.604.050.00
23.604.060.00
60.397.001.00
Application / Adjustment
Please note: The DynaCox evolution
can be applied with the patient either
standing or lying. Wherever necessary,
the following instructions will point out
the differences between these two
types of application.
Pre-Adjusting the
Orthosis Component
To keep the application time as short as
possible for the patient, please make all
adjustments on the orthosis component
without the bandage. Only connect the
orthosis component to the bandage
when all of the following pre-adjust-
ments have been completed.
EN-8
User Manual
Product
DynaCox evo
Pad Set
DynaCox evo
Strap Set
DynaCox evo Lateral Bar,
short, with pad
DynaCox evo Lateral Bar,
standard, with pad
DynaCox evo Panel Padding,
with hook and loop fastener
DynaCox evo
Spare Part Set
Heavy Duty Scissors
Scope of Delivery
Set of spare pads. Recommended if
orthosis is worn for longer period of time.
Set of straps and strap-closure.
Lateral bar for patients
shorter than 1.55 m.
Lateral bar (included with every
DynaCox evolution).
Additional padding for the femoral panel,
for exceptionally slender patients.
Screws and washers.
1 pair of heavy duty scissors, serrated.
Pre-Adjusting the Pelvic Brace
1.
The pelvic brace consists of four
components (see fig. 2):
2
• an anterior belt (recognizable by the
central buckle)
• a posterior belt (recognizable by a sticker
saying "UP/INSIDE")
• two pelvic panels
The width of the hip brace can be
adjusted by changing the length of the