Teufel DynaCox evolution Gebrauchsanweisung Seite 38

ES
FR
EN
DynaCox® evolution
DE
6.
Put the condylar clasp around the
patient's leg, and check the position of
the condylar pads. The position of the
condylar pads can be adjusted step
by step, by pushing the pads further
to the front or to the back of the
condylar clasp (fig. 37).
37
7.
Secure the position of the condylar
pads by carefully tightening the Allen
head screws (1Nm) (fig. 38).
38
8. Close the condylar clasp by feeding the
hook-and-loop strap into the strap guide
and closing it (fig. 39).
EN-18
User Manual
39
9.
40
41
10.
11.
Close the thigh section of the
bandage (fig. 40).
The loop strap of the hook-and-loop
closure on the bandage can be shor-
tened with a suitable pair of scissors
(REF 60.397.001.00). Make sure to cut
between the loop fabric chevrons when
shortening the strap (fig. 41).
Re-check the correct fit of the orthosis.
Make more adjustments if necessary.
Once a correct fit has been achieved,
secure the Click & Lock closures on the
femoral panel and the hip brace.