ES
FR
EN
Screw Valve Kit
PL
DE
Accessories
A spare parts kit is available for the Screw Valve Kit:
REF
26.301.000.01
Application/
Adjustment
1. Positioning: Position the valve
in the distal area of the socket
(in a spot where the surface is
not too curved).
2. When using the valve for ther-
moforming test sockets or for
laminating: Use the dummy
not marked with a red dot
(diameter of cylinder
34mm, height 5mm).
3. When using the valve for
thermoforming flexible inner
EN-6
sockets: Use the dummy
User Manual
Product
Spare Part Kit
for Valve Kit
26.300.000.01
4. Grind down all protruding
5. Insert the valve unit from the
6. Take the valve unit and the
Scope of Delivery
Exhaust valve, silicone
seal for valve unit,
rubber seal for
threaded ring
marked with a red dot
(diameter of cylinder 33.5mm,
height 4mm).
material until you reach the
surface of the dummy.
inside of the socket (including
the silicone seal).
threaded ring and screw them
together (left-hand thread!).