Declaration Of Conformity - JB-Lighting Varyscan P7 Bedienungsanleitung

9. Declaration of conformity

(Directive 2014/35/EU of the council from 26. February 2014 on the harmonisation of the laws of Member States relating to elec-
(Directive 2014/30/EU of the council from 26. February 2014 on the approximation of the laws of the Member States relating to
The Manufacturer
declare that the product
is in agreement with the safety requirements of this directives. Following standards are contained in the evaluation
of the declaration of conformity:
Emission - requirements according
to: EN 55022:2010
Conducted emissions
EN 55022:2010
Radiated emissions
EN 55022:2010
Harmonic current emissions
EN 61000-3-2:2015
Flicker
EN 61000-3-3
Immunity - Requirements according to Electromagnetic compatibility (EMC) - Part 6-2:
DIN EN 61000-6-2:2005
EN 61000-4-2:2009
EN 61000-4-3: 2006 + A1:2008 + A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2006
EN 61000-4-6:2014
EN 61000-4-8:2010
EN 61000-4-11:2004
Blaustein, 23.03.2016
_______________________
Jürgen Braungardt
Managing Director
Declaration of Conformity
in terms of directive 2014/35/EU - low voltage directive
trical equipment designed for use within certain voltage limits)
in terms of directive 2014/30/EU - electromagnetic compatibility
electromagnetic compatibility)
JB-lighting Lichtanlagentechnik GmbH
Sallersteigweg 15
89134 Blaustein-Wippingen
Varyscan P7
Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurements
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurements
Information technology equipment - Radio disturbance characteristics -
Limits and methods of measurements
Electromagnetic compatibility (EMC)
part 3-2: Limits - Limits for harmonic current emissions
(equipment input current < 16A per phase)
Electromagnetic compatibility (EMC)
part 3-3: Limits - Limitation of voltage changes, voltage fluctuation and flicker
in public low-voltage supply systems, for equipment with rated
current < 16 A per phase and not subjected to conditional connection
Generic standards - Immunity for industrial environments
Part 4-2: Testing and measurements techniques
Electrostatic discharge immunity test
Part 4-3: Testing and measurements techniques
Radiated, radio-frequency, electromagnetic field immunity test
Part 4-4: Testing and measurements techniques
Electrical fast transient/burst immunity test
Part 4-5: Testing and measurements techniques
Surge immunity test
Part 4-6: Testing and measurements techniques
Immunity to conducted disturbances, induced by radio-frequency fields
Part 4-8: Testing and measurements techniques
Power frequency magnetic field immunity test
Part 4-11: Testing and measurements techniques
Voltage dips, short interruptions and voltage variations immunity tests
P7
- 51 -