Service; Service Menu - JB-Lighting Varyscan P7 Bedienungsanleitung

P7

7. Service

7.1 Service menu

RESET FIXTURE
This menu offers the command to reset the P7 and can be used as a first remedy if an error
occurs.
ERROR LIST
The ERROR LIST command displays a list of any errors detected. An error can simply be a
harmless and isolated incident, but if repeated errors occur, the P7 may require service or repair.
FUNCTION TEST
This menu provides a general test of all effects. It allows testing without controller. The
re-positioning of pan/tilt is disabled.
DMX TEST
This menu view the DMX values received on each channel. If the P7 does not behave as expect-
ed, reading the DMX values can help to troubleshoot.
INIT PAN TILT
The INIT PAN TILT feature reinitializes pan and tilt relative to their end stops. Use it if pan and
tilt appear to have lost calibration. This process will take approx. 3-4 minutes and finishes with
a reset.
DISPLAY CONTRAST
During a heating treatment the contrast of the LCD display can vary. The setting of the contrast
can be changed in this sub menu.
FINE ADJUST
Gobo wheel 2 and color wheel:
If the Gobo wheel 2 or the color wheel has to be dismantled during a repair, the wheels can be
calibrated again after renewed assembly.
Zoom and focus:
Zoom and focus are factory calibrated. If it loses this calibration or has to be changed due to
repairs, zoom and focus can be readjusted after repair. For details, please contact your dealer or
the JB-Lighting Service.
RECEIVESOFT
Use the RECEIVE SOFT command to prepare the P7 for a software upload. See software update
on page 49 and the uploader device documentation.
- 47 -