Downloaded from
www.Manualslib.com
Fuse Replacement
8.4 Fuse Replacement
Prior to fuse replacement, ensure that electronic load
is disconnected from external voltage supply and the
other connected instruments (such as UUT, control in-
struments, etc.).
Exclusively use fuses of voltage and current values in
compliance with the technical data section. Using aux-
iliary fuses, in particular short-circuiting fuse holders
is prohibited and can cause instrument destruction or
serious bodily injury of operator.
"
Schrauben im Gehäuseunterteil lösen.
"
Gehäuseoberteil vom Gehäuseunterteil vorsichtig
abheben.
"
Defekte Sicherung entnehmen.
"
Neue Sicherung einsetzen.
"
Gehäuseoberteil mit Gehäuseunterteil verschrauben.
UNITEST Hexagon 710
FS1: 0,63A / 500 V, IR 100 kA, F
z.B.: FERRAZ 500V FA 0,63 A
FS2: 12,5A / 600 V, IR 10 kA, F
z.B.: FERRAZ 500V FA 12,5 A
UNITEST Hexagon 720
FS1: 1 A / 600 V, IR 100 kA, F
z.B.: Gould Electronic SBS 1
FS2: 15 A / 1000 V, IR 10 kA, F
z.B.: Littlefuse 585 - 15
68
manuals search engine