BEHA Unitest Hexagon 710 Bedienungsanleitung Seite 60

Downloaded from www.Manualslib.com
Current Measurement
Current Measurement A
"
Select measurement range A using measurement
function selection dial.
"
Connect the test lead to the COM socket and the red
test lead to the A socket.
When connecting the test lead to the A socket, the
multimeter automatically switches to measurement
range A.
"
Select the type of current to be expected pressing
the
"
Connect test leads to UUT.
" Read the measurement result displayed.
Current Measurement mA and µA
"
Select either measurement range mA or mA, de-
pending on the current value to be expected, using
the measurement function selection dial. If the value
to be measured is unknown, start with the highest
measurement range.
"
Connect the black test lead to the COM socket and
the red test lead to the mA/µA socket.
"
Select the type of current to be expected pressing
the
"
Connect test leads to UUT.
"
Read the measurement displayed.
The multimeter automatically selects the most appro-
priate measurement range (auto ranging) For manual
measurement range selection, press the
If the display is not visible or fluctuating during the meas-
urement, the measurement value can be frozen by pressing
the key.
60
manuals search engine
key.
key.
key.