Introduction / Scope Of Supply - BEHA Unitest Hexagon 710 Bedienungsanleitung

Downloaded from www.Manualslib.com
Introduction / Scope of Suppl
References marked on instrument or in instruction man-
ual:
Warning of a potential danger, comply with instruction
manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Continuous double or reinforced insulation complies
with category II IEC 536.
Conformity symbol, the instrument complies with the
valid directives. It complies with the EMV Directive
(89/336/EEC), Standards EN 50081-1 and EN 50082-1
are fulfilled. It also complies with the Low Voltage Di-
rective (73/23/EEC), Standard EN 61010-1is fulfilled.
The instruction manual contains information and ref-
erences, necessary for safe operation and mainte-
nance of the instrument. Prior to using the instrument
(commissioning / assembly) the user is kindly re-
quested to thoroughly read the instruction manual and
comply with it in all sections.
Failure to read the instruction manual or to comply
with the warnings and references contained herein
can result in serious bodily injury or instrument dam-
age.

1.0 Introduction / Scope of Supply

You have acquired a high standard measurement instru-
ment by the company Ch. BEHA GmbH which allows to
carry out reproducible measurements over a very long
time period. The company Ch. BEHA GmbH is a member of
the world-wide operating BEHA group. The head office of
the BEHA group is located in Glottertal/Schwarzwald, to-
gether with the technological centre. The BEHA group is a
leading enterprise for test and measurement instruments.
manuals search engine
41