Herunterladen Inhalt Inhalt Diese Seite drucken

Use And Maintenance - Teka IZC 63632 MST Montageanleitung Und Empfehlungen Zur Verendung Und Wartung

Glaskeramik-kochfelder mit touch control
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 39
EN
Use and
Maintenance
User instructions of the
Touch Control
HANDLING ELEMENTS
2 Cursor slider for controlling
power.
Power and/or residual heat
indicator*.
Decimal dot of power and/of
residual heat indicator.
Direct access to "Power"
function.
Activation sensor for "Block"
function.
Pilot indicator light "Block"
function activated*.
Activation sensor for "Stop&Go"
function.
Pilot indicator light "Stop&Go"
function activated*.
"Minus" sensor for timer.
"Plus" sensor for timer.
12 Timer indicator.
Decimal dot of the timer.*
Activation sensor for "Chef"
functions; (depending on model).
Pilot indicator light "Mantener
caliente" function activated*;
(depending on model).
Pilot indicator light "Derretir"
function activated*, (depending on
model).
Pilot indicator light "Fuego lento"
function activated*; (depending on
model).
Pilot indicator light "Hervir"
function activated*; (depending on
model).
Pilot indicator light "Parrilla"
function activated* (depending on
model).
Pilot indicator light "Plancha"
function activated* (depending on
model).
Pilot indicator light "Fritura"
function activated* (depending on
model).
Pilot indicator light "Pochar"
function activated*; (depending on
model).
Sensor for activating the "Paeller"
32
function.
"Siguiente etapa" sensor to activate
and change from one phase to another.
Pilot indicator the "Paeller"
function activated*.
Pilot indicator of the phase
"Calentar aceite" activated*.
Pilot indicator the "Carne" phase
activated*.
Pilot indicator the "Verdura"
phase activated*.
Pilot indicator the "Caldo" phase
activated*.
Pilot indicator the "Arroz" phase
activated*.
Pilot indicator the "Socarrat"
phase activated*.
* Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
key, you only need to touch it with
function
Use the cursor slider (2) to adjust
power levels (0 - 9) by sliding your
increases the value, whereas sliding
towards the left decreases it.
It's also possible to directly select a
power level by placing your finger
directly on a desired point of the cursor
slider (2)
In order to select a plate on
these models, directly touch the
cursor slider (2).
SWITCHING ON THE DEVICE
1 Touch the On touch key
least one second. The touch control
will become active, a beep will be
heard and the indicators (3) will light
up displaying a "-". If any cooking
area is hot, the related indicator will
If you do not take any action in the next
10 seconds the touch control will switch
When the touch control is activated,
you can disconnect it at any time by
touching the touch button
if it has been locked (lock function
activated). The touch button
always has priority to disconnect the
touch control.
ACTIVATING PLATES
Once the Touch Control is activated
with sensor
turned on by following these steps:
1 Slide the finger or touch in any
position of one of the cursors "slider"
(2). The zone has been selected
and simultaneuously the power
level will be set between 0 and 9.
That power value will be shown on
the corresponding power indicator
and its decimal dot (4) will keep light
up during 10 seconds.
2 Use the cursor slider (2) to choose
a new cooking level between 0 and
9.
As long as the plate is selected, in
other words, with the decimal (4)
dot light up, its power level can be
TURNING OFF A PLATE
Using the touch slider key (2) lower
the power to level 0. The hotplate will
H will appear in its power indicator
(3), if the glass surface of the related
cooking area is hot and there is a risk
of burns. When the temperature drops,
is disconnected), or otherwise a "-" will
light up if the hob is still connected.
TURNING ALL PLATES OFF
(1) for at
All plates can be simultaneously
disconnected by using the general on/
(1). All plate indicators (3)
Pan detector
Induction cooking zones have a built-in
pan detector. This way, the plate will
stop working if there is no pan present
or if the pan is not suitable.
(1), even
The power indicator (3) will show a
symbol to designate "there is no pan
(1)
(1), any plate can be

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis