Device Care; Maintance; Transportation And Storage - I-Tech MIO-SONIC Benutzerhandbuch

Maintance

If used following the instructions given in this user guide, the equipment does
not require any particular kind of maintenance.
It is recommended that the manufacturer carries out a functional test every
24 months. The manufacturer does not consider the MIO-SONIC device
repairable by any personnel outside the company. Each operation of the kind
perpetuated by personnel not authorized by the manufacturer will be
considered as tampering the device, freeing the manufacturer from granting
warranty and from any danger that the user or the operator may be exposed
to.
CLEANLINESS
Switch off MIO-SONIC after each therapy session, as well as remove the cable
by the specific connector.
Clean the device from dust using a dry soft cloth. Resistant strains can be
removed using a sponge soaked in solution of water and alcohol.
Device not subject to sterilization.
Note:
− Never use solvents for cleaning. Cleaning agents cause damage to
the device.
Attention to the need for periodic maintenance, especially:
−
• inspection of main body for cracks, which may allow the ingress
of conductive fluid;
inspection of the main cable.
•

TRANSPORTATION AND STORAGE

Precaution for the transportation
There is no particular precaution to be taken during transportation of the
device, since MIO-SONIC is a portable device. In any case it is recommended
to store MIO-SONIC and its accessories in the supplied carrying bag after each
treatment. Protect the device from high temperature, direct daylight and
liquids. Keep the device in a fresh and well-ventilated environment.
Don't place any heavy objects on the device.
Precaution for the storage
The appliance is protected up to the following environmental conditions:
In operation
temperature
relative humidity
IACER Srl
from +5 to + 40 °C
from 30 to 75%
46

Device care

MNPG71-04