Used Batteries; Storage - Parkside PLGK 12 V A2 Originalbetriebsanleitung

GB IE
The charging time is
around 1 hour (PAPK 12
A2).
1. Remove the battery (1) from
the appliance if necessary.
2. Plug the battery charger (3)
into a mains outlet.
3. Insert the battery (1) in the
charging compartment of the
battery charger (3).
4. Pull the battery (1) out of the
battery charger (3).
5. Unplug the battery charger
(3) from the mains.
Overview of the LED indi-
cators on the charger (3):
Red LED (4) illuminated: Error
30
Green LED (5)
lights up without
battery inserted:
Charger ready.
Green LED (5)
lights up:
Battery such al-
leged charged.
Red LED (4) lights
up:
Battery charging.

Used batteries

• If a fully recharged battery
lasts for considerably shorter
operating times, the battery
is used up and needs to be
replaced. Only use an OEM
battery pack replacement
available from our Customer
Service.
• Always take heed of the
applicable safety instructions
as well as the environmental
protection regulations and
information (see "Cleaning
and Maintenance").

Storage

• Only store the batteries in
the partially-charged state.
During prolonged storage,
2 to 3 LEDs should be illu-
minated.
The battery's (1) charge level
is indicated by the charge
state indicator.
• Remove the battery before
storing the unit for longer
periods of time.
• During a longer storage
period, check the state of
charge of the battery and re-
charge if necessary roughly
every 3 months.