Parkside PLGK 12 V A2 Originalbetriebsanleitung Seite 26

GB IE
fire, explosion or risk of
injury.
• Do not expose batter-
ies to fire or elevated
temperatures. Fire
or temperatures over
130 °C can cause an
explosion.
• Follow all instructions
for charging and never
charge the battery or
the battery-powered
tool outside the tem-
perature range stated
in the operating in-
structions. Incorrect
charging or charging
outside the permitted
temperature range may
destroy the battery and
increase the risk of fire.
Service
• Never repair damaged
batteries. All battery re-
pairs should be carried
out by the manufacturer
or authorised customer
service centres only.
26
Special safety
directions for battery-
operated tools
• Ensure that the device
is switched off before
inserting the battery.
Inserting a battery into
a power tool that is
switched on may result
in accidents.
• Recharge the batteries
indoors only because
the battery charger is
designed for indoor use
only.
• To reduce the electric
shock hazard, unplug
the battery charger
from the mains before
cleaning the charger.
• Do not subject the bat-
tery to strong sunlight
over long periods and
do not leave it on a
heater. Heat damages
the battery and there is
a risk of explosion.
• Allow a hot battery to
cool before charging.
• Do not open up the bat-
tery and avoid mech-