Teufel WJT 8 Gebrauchsanweisung Seite 32

ES
FR
EN WJT 8 Lock System
D D
DE
Insert the lock body from the
top into the socket, screw it
together with the mounting
plate. Screw the lock down far
enough so the brass thread
that connects to the release
button is visible. (Fig. 20)
20
The final steps of the assem-
bly are done using the four
components included with the
Lock System WJT 8. (Fig. 21)
21
EN-14
User Manual
Insert the short metal tube
with the snap ring (part of
the release button kit) into
the plastic tube. Insert it all
the way so its threaded part
protrudes from the bottom of
the plastic tube. (Fig. 22)
22
Place the white foam disc onto
the thread. Then screw this
part onto the release button
kit with the lock thread. The
image shows an example for
a possible combination on the
lock. (Fig. 23)
23