Teufel WJT 8 Gebrauchsanweisung Seite 31

Once the resin has fully cured,
remove the PVA film and
carefully grind the material
down to reveal the dummy
screw. (Fig. 15)
15
Remove the dummy screw
from the inside of the so-
cket using an M10 hex key
to unscrew the bolt.
(Fig. 16, 17, 18)
16
WJT 8 Lock System
17
18
Remove the screw. Excavate
the lateral access for the re-
lease button in the laminate at
the desired position (the lock
will later be turned to be in the
final position). (Fig. 19)
19
ES
FR
User Manual EN
DE
EN-13
D D