Tips And Advice On Operation - SOMFY Roll Up Basic 28 WireFree RTS Li-ion Anleitung

Roll Up Basic 28 WireFree RTS Li-Ion

3. 6. TIPS AND ADVICE ON OPERATION

Observations
The driven product The thermal protection has activated.
does not operate.
The control point battery is low.
3. 6. 1. Adding/Deleting Control point
Β
Green LED blinks fast when adding or deleting remote control
Using a control point (A) that has been previously programmed to the driven product:
1) Press and hold the control point programming
button (A) until driven product briefly moves Up and
Down.
2) Quickly press the programming button on the back
of the new control point (B) to add or delete control
point.
Using the Programming button on motor head:
1) Press and hold the motor head programming button
until driven product briefly moves Up and Down.
2) Quickly press the control point programming button
(B) to add or delete control point.
3. 6. 2. Disabling/Activating "RTS" radio technology when control point completely is programmed
Β
Disabling the radio transmission saves battery life during shipment or for a long period of non-use (eg
storage). The following steps can only be performed in "User" mode.
Press and hold the programmed control point
programming button or the motor head programming
button until the driven product briefly moves Up and
Down. (Motor is in programming mode)
TO DEACTIVATE RTS RADIO TECHNOLOGY:
a) Press the UP, MY and DOWN simultaneously until
the driven product briefly moves UP and Down once.
TO ACTIVATE RTS RADIO TECHNOLOGY:
b) Briefly press the motor head programming button,
the driven product briefly moves UP and Down once.
Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
Possible causes
1
PROG.
1
PROG.
a
Solutions
Wait for the drive to cool down.
Change battery as required.
2
PROG.
A
A
2
PROG.
b
EN
B
B
11