Operation And Maintenance; Mode Selection: Roller Or Tilting Mode; Controlling Up, Down, My: In Roller Mode; Controlling Up, Down, My: In Tilting Mode - SOMFY Roll Up Basic 28 WireFree RTS Li-ion Anleitung

Roll Up Basic 28 WireFree RTS Li-Ion

3. OPERATION AND MAINTENANCE

3. 1. MODE SELECTION: ROLLER OR TILTING MODE

The Roll Up 28 is designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the Roll Up 28 to be set according to the type of application.
Β
The Roll Up 28 is set (by default) to work in Roller mode.
Β
Yellow LED lights on in Roller mode.
1) Move the driven product away from the end limits.
2) Simultaneously press and hold the UP and DOWN
buttons until the driven product briefly moves Up
and Down.
3) Press and hold the MY and DOWN buttons
simultaneously until the driven product briefly
moves Up and Down to change from Roller mode to
Tilting mode.
Β
Yellow LED blinks slowly in Tilting mode.
3. 2. CONTROLLING UP, DOWN, MY: IN
ROLLER MODE
1) To move the driven product from a limit to the
other limit, briefly press the UP or DOWN button.
2) To stop the driven product, briefly press the MY
button.
3) (If a my position is recorded) To move the driven
product to the my position, briefly press the MY
button.
3. 3. CONTROLLING UP, DOWN, MY: IN
TILTING MODE
1) To move the driven product from a limit to the other
limit, briefly press (less than 0,5s) the UP or DOWN
button.
2) To stop the driven product, press the MY button.
3) (If a my position is recorded) To move the driven
product to the my position, briefly press the MY
button. The driven product will automatically travel
to the down end limit (first) then to the my position.
4) To tilt the slats, press and hold the UP or DOWN
button or use the scroll of the remote control, until
the slats reach the desired position.
Copyright © 2017 - 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved
1
2
3
1
2 3
1
2 3
4
EN
9