Battery Level Display; Preparing The Surfaces To Be Glued - Parkside PHPA 4 B3 Originalbetriebsanleitung

Stopping charging
♦ The green battery charge level indicator
charging process is complete and the cordless glue gun is ready
for use.
♦ Remove the cordless glue gun from the charging cradle
♦ Disconnect the mains adapter

Battery level display

The battery level display
2 coloured LEDs.
Green LED
The battery is fully charged.
Red LED
The battery is flat. Recharge it.

Preparing the surfaces to be glued

■ Do not use flammable solvents to clean the surfaces to be glued.
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C.
■ The area to be glued must be clean, dry and free of grease.
♦ Smooth surfaces should be roughened before gluing.
♦ Quick-cooling materials such as steel should be warmed a little to
facilitate adhesion.
│ GB │ IE
■ 30
from the power supply.
indicates the charge level using
indicates that the
.
PHPA 4 B3