Parkside PHPA 4 B3 Originalbetriebsanleitung Seite 35

Automatic switch off
NOTE
► The cordless glue gun switches itself off after 10 minutes to
save energy.
–
Switch the cordless glue gun back on. Check the tempera-
ture indicator
see whether the appliance needs to be recharged or heated
further.
► To save energy, do not switch the cordless glue gun on unless
you plan to use it.
► During breaks in work, put the glue gun down on the stand
Gluing
♦ Pull the trigger
your requirements.
♦ Apply the glue in spots. For flexible materials, such as textiles,
apply the glue in zigzag lines.
♦ Press the two workpieces to be bonded together immediately
after applying the glue and hold for about 30 seconds. The
glued bond is ready after about 5 minutes.
♦ During breaks in work, put the glue gun down on the stand
♦ Remove any glue residue after it has cooled down with a sharp
knife. Bonded joints can be released by heating.
│ GB │ IE
■ 32
and the battery capacity indicator
to regulate the flow of glue in accordance with
to
.
.
PHPA 4 B3