Stopping Charging; Battery Level Display; Preparing The Surfaces To Be Glued - Parkside PHPA 4 B2 Originalbetriebsanleitung

Stopping charging:

♦ The green battery charge level indicator
charging process is complete and the cordless glue gun is
ready for use .
♦ Remove the cordless glue gun from the charging cradle
♦ Disconnect the mains adapter

Battery level display

The battery level display
LEDs .
Green LED:
The battery is fully charged .
Red LED:
The battery is flat . Recharge it .

Preparing the surfaces to be glued

■ Do not use flammable solvents to clean the surfaces to be glued .
■ The ambient temperature and the materials to be bonded may
not be colder than 5°C and not warmer than 50°C .
■ The area to be glued must be clean, dry and free of grease .
♦ Smooth surfaces should be roughened before gluing .
♦ Quick-cooling materials such as steel should be warmed a little
to facilitate adhesion .
PHPA 4 B2
from the power supply .
indicates the charge level using 2 coloured
indicates that the
GB │ IE │ NI │
.
11 ■