Instrument Status Messages Shortly After Switching On The Cph7650; Display Contents Of The Operating Modes - WIKA CPH7650 Betriebsanleitung

6. Commissioning, operation
6.2.2 Switching the pressure calibrator off
The instrument is switched off using the "Switch off CPH" menu item in the first submenu.
For this, press the SETUP key, select the "Switch off CPH" menu item and confirm using
the SELECT button. Switch off the CPH7650.
EN

6.2.3 Display contents of the operating modes

Operating mode: MEASURING
When a CPH7650 with a CPT6000 reference pressure sensor connected to it is first
switched on, the instrument (after displaying a brief status message) switches to
MEASURING mode (see following figure)
Display: MEASURING with reference pressure sensor only (without test item)
a) Measuring range of the CPT6000 reference pressure sensor (which is currently
connected)
b) Current measured value of the reference pressure sensor
c) Pressure unit (adjustable via menu)
26
All manuals and user guides at all-guides.com
Functions
CPH-Info
ReferenceSensor
Ref. Sensor-list
CPH-Configuration
Interface
CLEAR CalData
CPH switch off
a
b
Switching off
c
WIKA operating instructions, model CPH7650